Design and Implementation of an Arduino Uno Based Automatic Lighting Control System Using Passive Infrared (PIR) Sensors
DOI:
https://doi.org/10.38035/dit.v3i3.3402Keywords:
Arduino, Automatic Lighting, Energy Efficiency, Internet of Things, PIR SensorAbstract
In worship facilities such as mosques, electrical energy is frequently wasted due to lighting systems that remain active for extended periods, especially in restrooms and ablution (wudhu) areas. This condition is influenced by inconsistent usage patterns and limited user awareness in switching off lights after use. Despite these challenges, the application of Internet of Things (IoT) technology in such environments is still relatively minimal, mainly due to insufficient technological literacy and budget limitations. The Internet of Things (IoT) refers to a network of interconnected electronic devices capable of exchanging data and communicating through integrated systems. Motion detection is commonly employed to identify human presence, with the Passive Infrared Receiver (PIR) sensor being one of the most appropriate choices for this purpose. This sensor is widely recognized for its effectiveness in remote monitoring applications. This study aims to develop an IoT-based automatic lighting control system utilizing motion sensors to support energy efficiency and create an environmentally friendly environment. The research methodology includes requirement analysis, system implementation, and testing phases. The hardware realization, combined with programming using the Arduino IDE platform, successfully implements the automatic lighting control logic as designed. The system integrates PIR and ultrasonic sensors, and experimental results demonstrate that it is capable of accurately detecting objects within a defined range and responding rapidly and reliably to human movement.
References
Arifin, W., & Murdowo, S. (2025). Sensor Passive Infrared Receiver Dan Ultrasonik Dalam Perancangan Lampu Otomatis. Jupiter, 6(2), 279–286.
Arifin, W., Murdowo, S., & Khasanah, F. N. (2025). Rancang Bangun Sistem Peringatan Dini Untuk Pencegahan Virus Covid 19 Melalui Deteksi Suhu Tubuh Secara Real Time Berbasis Informasi Suara. Jurnal Kajian Ilmiah, 25(1), 33–40.
Attamimi, I. Y., Prasetyo, M. T., Saptadi, A. H., & Muntasiroh, L. (2022). Rancang Bangun Toilet Nyala Lampu Otomatis Menggunakan Sensor PIR (Passive Infrared) Pendeteksi Orang Berbasis Arduino Uno Design Of Automatic Light On Toilet Using PIR Sensor (Passive Infrared) People Detection Based On Arduino Uno. Seminar Nasional UNIMUS, 5, 124–130.
Costaner, L., Guntoro, Lisnawita, Zamsuri, A., & Putra, P. P. (2022). Implementasi Simulasi Elektronika Dan Arduino Virtual Dengan Circuit Tinkercad. J-COSCIS : Journal of Computer Science Community Service, 2(2), 18–25. https://doi.org/10.31849/jcoscis.v2i2.9139
Darmanto, T., Antonius, & Sutrisno, T. (2020). Penerapan Sensor Ldr Dan Sensor PIR Pada Prototype Penerangan Lampu Rumah. Inteksis, 7(1), 72–79.
Fatimah, Rahmawati, E., Sofiyah, & Subhan, M. (2021). Sistem Lampu Otomatis Berbasis Arduino Uno Menggunakan Modul Sensor PIR HC. Gravity Edu, 4(1), 5–9.
Hutabarat, L., & Susanti, E. (2020). Perancangan Sistem Monitoring Rumah Dengan Sensor Passive Infra Red (PIR) Menggunakan NodeMCU Berbasis Internet of Things (IoT). Sigma Teknika, 3(2), 139–147. https://doi.org/10.33373/sigma.v3i2.2740
Kusuma, R. W., Faiza, D., Thamrin, & Anori, S. (2024). Automatic Light Control System for Bathroom Using Arduino Uno. Journal of Hypermedia & Technology-Enhanced Learning, 2(3), 229–244.
Mariam, S., Rafly, M., Kada, S., & Pramudya, M. (2023). Implementasi Sistem Kendali Lampu Rumah Secara Otomatis Menggunakan Metode Fuzzy Logic. Jurnal Citra Pendidikan, 3(4), 1575–1580.
Pambudi, A. P., Supriyadi, A. P., Kurniadi, A. R., Fazryansyah, R., & Stefanie, A. (2025). Implementasi Sistem Pencahayaan Otomatis Dan Monitoring Berbasis IoT Pada Area Parkir Menggunakan Sensor LDR Dan PIR. Jurnal Informatika Dan Teknik Elektro Terapan, 13(3). https://doi.org/https://doi.org/10.23960/jitet.v13i3.6703
Purwanti, S., Febriani, A., Mardeni, & Irawan, Y. (2021). Temperature monitoring system for egg incubators using raspberry Pi3 based on internet of things (IoT). Journal of Robotics and Control (JRC), 2(5), 349–352. https://doi.org/10.18196/jrc.25105
Putri Ginting, B., & Desy Nur Utomo, A. (2024). Monitoring Penerapan Internet of Things (Iot) Dalam Meningkatkan Efisiensi Dan Produktivitas Pada Budidaya Peternakan Bebek. JATI (Jurnal Mahasiswa Teknik Informatika), 8(4), 5843–5848. https://doi.org/10.36040/jati.v8i4.10093
Rakayama, I., & Firmawati, N. (2022). Rancang Bangun Sistem Otomatisasi Lampu Belajar Menggunakan Sensor PIR dan Sensor Load Cell Berbasis Mikrokontroler Arduino. Jurnal Fisika Unand, 11(2), 228–234. https://doi.org/10.25077/jfu.11.2.228-234.2022
Riskawati, Said, S., & Herman, N. M. (2024). Efektivitas Simulasi Pola LED Menggunakan Tinkercad: Media Pembelajaran Inovatif pada Elektronika Dasar. Jurnal Pendidikan Fisika Undiksha, 14(3), 524–531. https://doi.org/10.23887/jjpf.v14i3.87201
Sahid, A. A., Ariyani, P. F., Informatika, S. T., Informasi, F. T., Luhur, U. B., Selatan, K. J., Ziad, I., Mustopa, M. S., & Rohmayani, D. (2023). Prototype Untuk Penerimaan Paket Berbasis Internet Design and Development Of A Smartbox Using Prototype Method For Internet Of Things-Based Parcel Reception. Seminar Nasional Mahasiswa Fakultas Teknologi Informasi (SENAFTI), 2(September), 1784–1793.
Setiadi, T., Haidar, L., & Fadlan, M. (2022). Prototype Rancang Bangun Sistem Lampu Dan Kipas Otomatis Menggunakan Sensor Pir Gerak Suhu Dan Cahaya Berbasis Arduino Uno. Journal of Computer Science and Technology (JCS-TECH), 2(2), 31–39. https://doi.org/10.54840/jcstech.v2i2.40
Sonya, M. A. (2024). Pengatur Lampu Otomatis Pada Sistem Rumah Cerdas Untuk Lansia Berbasis Internet Of Things. Universitas Islam Indonesia.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Wafi Arifin, Sugeng Murdowo, Fata Nidaul Khasanah

This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright :
Authors who publish their manuscripts in this journal agree to the following conditions:
- Copyright in each article belongs to the author.
- The author acknowledges that the DIT has the right to be the first to publish under a Creative Commons Attribution 4.0 International license (Attribution 4.0 International CC BY 4.0).
- Authors can submit articles separately, arrange the non-exclusive distribution of manuscripts that have been published in this journal to other versions (for example, sent to the author's institutional repository, publication in a book, etc.), by acknowledging that the manuscript has been published for the first time at DIT.



















